CCNA Tutorials: LACP mode active and passive

Showing posts with label LACP mode active and passive. Show all posts

Tuesday, March 11, 2014

Configure Etherchannel using LACP mode Active & Passive

Configure Etherchannel using LACP(Link Aggregation Control Protocol) mode Active/Passive

We configure Etherchannel using LACP mode Active and Passive in the following topology.

Above topology, for both switches we use fastEthernet port 0/1, 0/2, 0/3 & 0/4.
So to configure Etherchannel we need to type the following commands in both switches. But in case of mode, in left switch we use "Active" and in right switch we use "Passive".